The 18-111-104 is a four input to one output SDI video switch with single ended inputs (75 Ohm termination). This unit does equalization on the input signals to correct for long cables and re-clocks the output to remove jitter. The unit has two outputs, both provide the same selected input signal (this is not a matrix switch). Unused outputs do not need to be terminated with 75 Ohms. All of the video connections are BNC connectors. This unit is intended to be used with SDI (SMPTE 424M, SMPTE 292M, SMPTE 259M) video signals. A USB port provides the user a way to set the control configuration. This unit can be controlled by push buttons, contact closures, pre-defined timed switching, or automatic switching on loss of signal.
SDI video switch
4 inputs, 2 output configuration
Data Rates: 125 Mbps to 2.97 Gbps
Outputs are re-clocked
Standard single ended 75 Ohm terminated inputs
BNC connectors for video signals
Sealed epoxy package
Isolated power supply (12-24 AC, 10-34 DC)
2.2” X 4.4” X 0.65” size (not including connectors)