The 12V AC Brick™ is designed to function properly with an input power of 11-13V AC. The Brick will not operate from a DC voltage. A 2.1mm P5 style connector is used for the power input. If
the input voltage is a grounded system, the center pin of the P5 is the power connection and the barrel is the ground side. All ProSeries units are shipped with a 12V AC, 600mA floating power supply that eliminates any ground loops through the power supply connection.
Balanced mono audio distribution amplifier
Unity gain
Individual drivers
Terminal block connectors
DA Audio Input - Other
DA Audio Output - Other
Warranty - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
-40 F
Mount Type:
Threaded inserts
Number of Inputs:
1
Number of Outputs:
4
AC Voltage (Maximum):
13 Volts
AC Voltage (Minimum):
11 Volts
Current Draw:
0.10 Amps
Shipping Weight:
2 lbs
Warranty (Length/Type):
2 Years
Frequency Response:
DC to 100 kHz @ -3.0 dB
Input Signal Level:
0 to 8.0 Vpp (within -4V to +4V range from ground)
Input Impedance:
>5 kohms
Input Coupling:
DC
Gain:
Unity
Output Impedance:
50 ohm
Operating Humidity:
0 to 95 %
Package:
Solid epoxy block
Package Dimension:
2.2 x 4.4 x 0.65 inch not including connectors