The 12VAC Brick™ is designed to function properly with an input power of 11-13VAC. The Brick will not operate from a DC voltage. A 2.1 mm P5 style connector is used for the power input. If
the input voltage is a grounded system, the center pin of the P5 is the power connection and the barrel is the ground side. All ProSeries units are shipped with a 12VAC, 600mA floating power supply that eliminates any ground loops through the power supply connection.
Unbalanced mono audio distribution amplifier
Unity gain
RCA connectors
12VAC with P5 power connector
DA Audio Input - RCA
DA Audio Output - RCA
Warranty - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
-40 F
Mount Type:
Threaded inserts
Number of Inputs:
1
Number of Outputs:
16
AC Voltage (Maximum):
13 Volts
AC Voltage (Minimum):
11 Volts
Current Draw:
0.25 Amps
Shipping Weight:
4 lbs
Warranty (Length/Type):
2 Years
Frequency Response:
DC to 100 kHz @ -3.0 dB
Input Signal Level:
0 to 8.0 Vpp (within -4V to +4V range from ground)
Input Impedance:
>5 kohms
Input Coupling:
DC
Gain:
Unity
Output Impedance:
100 ohm
Operating Humidity:
0 to 95 %
Package:
Solid epoxy block
Package Dimension:
2.2 x 4.4 x 2.9 inch not including connectors