SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications
Line-interactive automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output during brownouts as low as 83V and overvoltages to 145V
Enables continuous operation through blackouts, voltage fluctuations and surges
Line-interactive AVR provides a 14% boost during brownouts and a 12% voltage cut during overvoltages
Standard internal battery set offers 19 min. runtime at half load (325W) and 7 min. at full load (650W)
1050VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 100V, 110V or 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost during brownouts and voltage cut during overvoltages to maintain regulated 100V, 110V or 120V nominal output over an input voltage range of 95-145V. Features NEMA 5-15P input plug and 8 NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Features 3-stage metered current monitoring and battery charge status LEDs. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Field replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme.
SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications
Line-interactive automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output during brownouts as low as 83V and overvoltages to 145V
Enables continuous operation through blackouts, voltage fluctuations and surges
Line-interactive AVR provides a 14% boost during brownouts and a 12% voltage cut during overvoltages
Standard internal battery set offers 19 min. runtime at half load (325W) and 7 min. at full load (650W)
Space-saving upright tower format
Network interfaces support simultaneous communications via built-in USB port, DB9 serial port and SNMPWEBCARD slot
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, timed inverter shutoff, activate self-test and output power control
NEMA 5-15P input plug; 8 x battery-supported NEMA 5-15R output receptacles
Front panel LEDs offer current monitoring, voltage regulation and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
Single-line tel/DSL or network Ethernet line surge suppression
Package includes SMART1050SLT UPS System, PowerAlert Software CD, USB and serial cabling
Battery replacement description:
Hot-swappable, user replaceable batteries
Voltage regulation description:
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 95 to 145 (120v), 87 to 133 (110v), 83 to 121 (100v)
Overvoltage correction:
Voltage reduction of 12% applies when input is 127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v)
Undervoltage correction:
Voltage boost of 14% applies when input is 95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v)
LED Indicators:
Status LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter for load and battery charge level
Site wiring fault indication:
Rear panel site wiring fault LED
Alarms:
Audible alarm indicates power failure and overload conditions
Alarm cancel operation:
Power-fail alarm can be silenced using alarm-cancel switch
Switches:
2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection
UPS AC suppression joule rating:
690
UPS AC suppression response time:
Instantaneous
UPS Dataline suppression:
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise suppression:
Yes
Installation form factors supported with included accessories:
Tower
Primary Form Factor:
Tower
Shipping dimensions (height x width x depth:
14 x 9.8 x 18.5 inch
UPS housing material:
Steel
Cooling Method:
Fan
Storage Temperature Range:
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
Relative Humidity:
0 to 95%, non-condensing
AC mode BTU / hr. (full load):
141.1
Battery mode BTU / hr. (full load):
452.7
Audible Noise:
Audible Noise < 50 dBA at Front Side 1 Meter
Communications interface:
USB; DB9 Serial; Slot for SNMP/Web interface
Network monitoring port description:
Supports detailed monitoring of UPS and site power conditions
PowerAlert software:
Included
Communications Cable:
USB and DB9 cabling included
WatchDog compatibility:
Supports Watchdog application, OS and hard-reboot restart options for remote applications.
Transfer Time:
4-6 milliseconds
Low voltage transfer to battery power (setpoint):
95V (120V), 87V (110V), 83V (100V)
High voltage transfer to battery power (setpoint):
145V (120V), 133V (110V), 121V (100V)
Cold Start (startup in battery mode during a power failure):
Cold-start operation supported
High availability UPS features:
Hot swappable batteries
Certifications:
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI
RoHS Compliant:
Yes
Cisco Compatible:
Yes
WEXT1D
- 1-Year Extended Warranty - For select Tripp Lite Products
WEXT2D
- 2-Year Extended Warranty - For select Tripp Lite Products