The FP-PEQ3 is the ideal choice in many applications where parametric equalization or acoustic notch filtering is needed. The FP-PEQ3 is a single-channel module featuring three identical independent filters. Each filter has separately adjustable FREQUENCY, BOOST/CUT amplitude, and bandwidth (BW) parameters. The FREQUENCY has three fully overlapping switch-selectable ranges: 15 Hz to 200 Hz, 150 Hz to 2 kHz, 1.5 kHz to 20 kHz. The BOOST/CUT provides a +/-15 dB range, switch-selectable to produce either cut or boost, making acoustic adjustment easier than with other parametric equalizers. Setting a given filters BOOST/CUT to minimum completely removes that filter from the circuit. The bandwidth (BW) allows adjustment from 0.04 octave to 1.5 octave.
Highly Versatile Parametric Equalizer
Independent Adjustment Controls
Adjustable Bandwidth .04 to 1.5 Octave
Adjustable Frequency 15 Hz to 20 kHz
Cut or Boost Adjustable +/- 15 dB
Overlapping Frequency Bands
Output Level Metering
Studio Quality, Low-Noise Performance
Convenience of RDL® FLAT-PAKs™
Equalizer Type - Parametric Equalizer
Equalizer Input Connector - Other
Equalizer Output Connector - Other
Noise:
< -80 dB (below 20 W RMS)
Noise:
< -90 dB (below +4 dB)
Height:
1.42 in. 3.61 cm
Width:
3.25 in. 8.26 cm
Total Harmonic Distortion + Noise (THD+N):
0.01 %
Depth:
5.66 in
Height:
1.42 in
Width:
3.25 in
Shipping Weight:
0.80 lbs
Noise:
< -90 dB (below +4 dB)
Inputs (2):
+4 dBu balanced on detachable terminalblock, +/-10 dBV unbalanced phono jack
Input Impedance:
10 kohm (balanced bridging)
Input Impedance:
10 kohm (unbalanced)
Gain:
Off to +3 dB (adjustable)
Outputs (2):
+4 dBu balanced on plug-in terminal block, +/-10 dBV unbalanced phono jack
Filters (3):
Independently adjustable
Frequency Range:
15 Hz to 200 Hz, 150 Hz to 2 kHz, 1.5 kHz to 20 kHz (adjustable) (switch-selectable ranges)