In-line microphone compressor produces consistent audio levels despite wide variations from the microphone. It is installed between a dynamic or condenser microphone and a mic-level mixer or amplifier input. A rear-panel output level trimmer is provided although it is typically left in the normal default position. It is used for recording, paging and public address in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.
Produces consistent levels from any microphone
Installs between microphone and mixer/amplifier
Improves intelligibility with fast automatic level control
Controls overloads that cause distortion and clipping
Front-panel set-up trimmer with LED indicator
XLR input and output
Gold-plated connector contacts
Exceptional level control range
Includes worldwide power supply
Required Computer Operating Systems - Other
Compressor Type - Hardware
Warranty - Yes
Shipping Weight:
0.90 lbs
Warranty (Length/Type):
3 years
INPUT:
Microphone level, -60 to -30dBu nominal
Input Impedance:
> 1 kohms (Balanced)
Minimum Input Level:
-60dBu at maximum gain, -30dBu at minimum gain
Maximum Input Level:
0 dBu (at minimum gain)
Output:
Microphone level, -55dBu to -30dBu (adjustable), -45dBu (Normal)
Output Impedance:
150ohms nominal, balanced
Frequency Response:
50Hz to 20kHz (at +/-0.5dB)
Compression:
30 dB (Automatic adjusting attack and release times)
Power supply current:
55mA (Idle), 60mA (Maximum), 70mA (maximum with phantom)
Power Supply Input Voltage:
100 to 240 VAC
Case Dimensions (W X D):
2.9 x 5 in
Mounting Size:
1/6 rack width
Package dimensions:
9.5 X 7 X 2.25 in
EZ-MPA1
- Microphone Preamplifier - Stereo Output with Compressors
EZ-MPA2
- Dual Microphone Preamplifier - Stereo Output with Compressors