100-UHF PLL Wireless In-ear Monitor System. Externally powered by AC-DC power adapter. 100 selectable UHF frequencies for interference-free performance (up to 8 systems can operate simultaneously). System consists of one PEM-1000T transmitter and one PEM-1000R bodypack receiver (unlimited additional PEM-1000R receivers can operate with the same transmitter). Easy setup and use with either automatic AutoScan or manual open-frequency selection and ASC™ infrared synchronization of selected channel between transmitter and receivers. Rugged, all-metal half-rack transmitter. Rack mountable singly or side-by-side with optional rack kits. Both transmitter and receiver offer a user-friendly menu with complete control options shown in the LCD display. Proprietary companding circuitry for wide dynamic range and clear, natural sound. Includes lightweight, soft rubber, form-fitted earbuds for comfort and optimum acoustics and isolation. Up to 500ft typical operating range (depending on site conditions). Rugged, foam-padded traveling case provides easy, safe transport and storage. Rugged, all metal half-rack that can be rack mounted singly or side-by-side with optional rack kits. Receiver has AutoScan for finding an open channel and IR SYNC to system transmitter. Handy mute button for muting audio if desired during use.
Rugged, all-metal half-rack transmitter
Rack mountable singly or side-by-side with optional rack kits
Up to 500ft typical operating range
Rugged, foam-padded traveling case provides easy, safe transport and storage
Externally powered by AC-DC power adapter
Operating Frequency Range:
100 selectable channels, 673 to 685.375MHz, country dependent
Modulation:
Mono or stereo (MPX with pilot tone), F3E +/-25kHz, nominal FM
Audio Frequency Response:
50 to 15,000 Hz
THD:
<1 %
Signal-to-Noise Ratio:
>80 dB
Operating Range:
Up to 500 ft
PEM-1000T RF Output Power:
100mW (Hi), 10mW (Lo), country dependent
PEM-1000T Spurious Emission:
>-55 dBc
PEM-1000T Frequency Stability:
+/-100 ppm
PEM-1000T Headphones Out Power:
50mW maximum at 16 to 32ohms
PEM-1000T Input impedance:
750 ohms
PEM-1000T Nominal Input Level:
0 dBm
PEM-1000T Maximum Input Levels:
+4/+10 dB
PEM-1000T Controls:
Power on/off, menu buttons, headphones monitor volume control
PEM-1000T Connectors:
1/4-inch stereo headphones monitor out, Combo 1/4-inch and XLR female type in, and 1/4-inch TS unbalanced loop out jacks, 1/12-inch barrel-type DC input jack, BNC antenna socket
PEM-1000T Indicators:
Power on LED, channel LCD and 5-segment L-R audio LED input displays
PEM-1000T Antenna:
1/4 wave rigid detachable, BNC mount
PEM-1000T Power Requirements:
External 12V/1000mA (110 to 240V auto selection)
PEM-1000T Dimensions:
8.27 x 9.1 x 1.75 inch
PEM-1000R Maximum Audio Output Level:
80mW maximum, 5mW (limiter on) at 16 to 32ohms