Hi-res audio recorder with simple transport controls. Bands and artists are increasingly being recorded for live CDs, DVDs, Internet releases and for general archive purposes, all are extremely valuable additional revenue streams for both the artist and service companies alike. Secondly, with limited production rehearsals now being the norm, mix engineers require live recordings so that a “virtual sound check” can be performed. This removes the need to directly involve the artist, and all the associated additional expense and time that a traditional sound check or rehearsal process incurs. The “virtual sound check” also allows the mix engineer the time to fine tune his mix and use the full potential that digital console automation offers.
Simple transport controls
96 tracks
96kHz audio
24-bit resolution
9 hours of internal storage
Mirrored drive capability
BWAV audio files
5U
Audiotape Player Format - Other
Height:
222 mm (8.7"), 5U high
Width:
482 mm (19")
Depth:
505 mm (19.9")
Product Weight:
44.09 lbs
Shipping Weight:
48.50 lbs
Front panel description:
96 x 4 LED input meters 96 x Yellow 'SOLO' LED indicators 96 x Red 'ARM / REC' LED indicators 4 x 'SELECT' switches 8 x Pairs of AES50 status LED indicators 1 x Time display (8 x Blue 7 segment displays) 1 x 'TIME' display mode select switch 3 x Blue LED time display mode indicators 3 x Transport switches, 'PLAY', 'STOP' and 'RECORD' 3 x Marker switches 'SET', 'BACK' and 'FORWARD' 1 x 'SOLO' switch 1 x 'SOLO' encoder 1 x Headphone rotary level control 1 x Headphone output (1/4" jack) 1 x Footswitch input (1/4" jack) 4 x Pairs of Hard Drive status LED indicators (2 x internal, 2 x external) 2 x USB 2.0 (type 'A') connectors 1 x Klark Teknik Tufflex roundel with Blue LED illumination 1 x Recessed 'POWER' switch
Rear panel description:
8 x AES50 Connectors - Neutrik Ethercons with status indication 1 x Linear Time Code Input - Neutrik B Series Female XLR 1 x DVI-I Output (or VGA Output with optional adapter) 1 x VGA Output 2 x Firewire 800 Connectors (Minimum) 2 x eSATA Connectors (Minimum) All other ATX Motherboard connectors will vary depending on the Motherboard used, but will include 2 x PS2 or 2 x USB 2.0 connections for a keyboard and mouse (KVM) 2 x USB 2.0 For archiving 1 x Mains Switch (part of the ATX Power Supply) 1 x IEC Power inlet (part of the ATX Power Supply)
Power Requirements:
Voltage:
100V a.c. to 240V a.c. ±10%
Frequency:
50Hz to 60Hz
Consumption:
<500W
AC Voltage:
240 Volts
Active Power:
500 Watt
Depth:
19.90 in
Height:
8.70 in
Width:
19 in
DN100
- Direct Injection Box with Ground-up Redesign
DN360
- Analogue Graphic Equalizer with Earth Lift Switch Enables Signal and Chassis Grounds
DN370
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN500 Plus
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN504 Plus
- Quad Compressor/Limiter with Switchable Knee Function