The UHBX-R-48 is a HDBaseT receiver that can power compatible HDBaseT sources over the same cable used to extend video and control signals. It is perfect for powering HD or UHD video conferencing cameras with PTZ control and eliminates the need for a power supply at the camera. The UHBX-R-48 s Extends HDMI video, RS-232, IR, and Power over one UTP (Cat6) cable. Full-HD (1080p) signals can be extended to 150meters, while Ultra-HD (4K) can be extended to 100 meters.
The receiver provides over 30watts of power to the transmitter at other side. Bi-directional RS-232 is provided for control, so if the source allows control via its HDBaseT port (such as compatible VC Cameras with PTZ), camera motion and zoom control are also extended.
IR (Infrared Remote) signals are also extended in both directions. IR detector and emitter cables are sold separately. The Receiver incorporates a Mode Switch. Normally (as shipped) the mode is set for Standard (STD). In this mode any video signal upto 4K resolution can be extended to 100meters. However, if the source is limited to 1080p, setting the mode to Long Reach (LR) allows Full-HD signals to be extended to 150meters.
Extends HDMI video, RS-232, IR, and Power over one UTP (Cat6) cable
Full-HD (1080p) signals can be extended to 150meters, and Ultra-HD (4K) can be extended to 100meters
Sends power over the cable to the HDBaseT video source
Provides over 30watts of power to the transmitter at other side
Extends bi-directional RS-232 (ideal for PTZ control)
Plug-and-Play Operation
Receiver/Transmitter Cable Type - HDMI
Receiver/Transmitter Format Type - HDMI
Receiver/Transmitter Format Type - RS-232
ROHS Compliant - Yes
Supported Resolution - 1080p (1920x1080)
Supported Resolution - VGA (640x480)
Supported Resolution - WUXGA (1920x1200)
Supported Resolution - Other
Warranty - Yes
HDBaseT - Yes
Spec Sheet available - Yes
Video Standards:
DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video)
Signal Type:
TMDS
Connectors:
Locking HDMI
Max Distance:
Standard Mode (STD): 330ft (100m)
Long Reach Mode (LR):
500ft (150m)
Audio Formats:
All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
DDC:
Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
CEC:
Pass-Thru DDC for Consumer Electronics Control compatible devices
RS232:
Bi-directional (full-duplex) any baud rate upto 115,200
IR:
Extended in both directions. Carrier modulation range from 30KHz to 60KHz
Power:
Uses ~6 watts, and can send 30 watts minimum on UTP
Temp/humidity:
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 9
Cooling:
Convection
Mounting:
End plates have L bracket with hole for surface mounting
Enclosure:
Metal (Steel ends and Aluminum extrusion)
Product Weight:
Receiver: 10oz (0.63lb or 284g); Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: receiver, power supply, power cord, manual, and packaging
Vibration:
ISTA 1A in carton (International Safe Transit Association)
MTBF:
90,000 hours (Calculated Estimate)
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
32 F
Certifications:
CE, FCC
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
DC Voltage:
48 Volts
Depth:
4.57 in
Height:
1.18 in
Width:
4.13 in
Warranty (Length/Type):
3 Years
UHBX-P2
- HDMI over UTP Extender with HDBaseT™ and PoH (Sender + Receiver)
UHBX-S-PD
- HDMI + RS232 + IR + PoH UTP Extender with Sender
UHBX-WP-P2
- HDMI over UTP Extender with HDBaseT™ and PoH ( Wall Plate Sender + Receiver )
UHBX-WPC-P2
- HDMI over UTP Extender with HDBaseT™ and PoH (Wall Plate Sender + Receiver )