The DLC410 Video over IP gateway greatly expands the DigiLink video platform capabilities to include SMPTE standards-based video-over-IP transport for both DVB-ASI and SD-SDI formats.
Based on SMPTE 2022 standards for encapsulation and forward error correction (FEC), the DLC410 enables SDI and ASI to be reliably transported across managed Gigabit Ethernet IP networks. Two independent video channels in each direction can be transported over a single Gig-E IP connection. SDI video is transported in its entirety, including all ancillary data. ASI video streams from less than 20 Mb/s to over 200 Mb/s are supported and can be rate limited. The DLC410 FEC enables the recovery of lost, error, or delayed IP packets and can withstand burst outages in excess of 3 mS. Access to the IP network is through rear accessible field replaceable SFPs either optically in WDM, CWDM , and DWDM wavelengths or electrically via an RJ-45 SFP. The DLC410 Video over IP Gateway is easily configurable and can be managed remotely via DigiLink’s DL-manager element management system.
Single Module transceiver for SD-SDI and DVB-ASI over Gig-E
Fully transparent carriage of SDI and SDTI including ancillary information
DVB-ASI stream rates from <20 Mb/s to >200 Mb/s
Supports 188-byte and 204-byte DVB-ASI packets
Provisionable limits on bandwidth for DVB-ASI
Four independent channels, two transmit, two receive
Unicast or multicast IP video streams
SMPTE 2022 standards based encapsulation and Forward Error Correction (FEC)
FEC recovers lost, errored, or delayed packets
Row and column FEC supported
Withstands burst outages in excess of 3mS
Optical budget to 34dB
Front panel 75ohm monitor port
Front and rear panel status LEDs
Configure via HTTP or SNMP (DL-Manager)
DL-Manager supports remote monitoring, configuration and firmware upgrades